适用于光网络终端 (ONT)、光网络单元 (ONU)、路由器和互联网服务提供商 (ISP) 备份项目的迷你型 UPS

适用于路由器和光网络终端的迷你型UPS:MU68W 对比 ML1202AC

MYLION MU68W and ML1202AC Mini UPS comparison showing DC-input and AC-input product designs.

Choose MU68W 不间断电源 when your project uses a compatible external DC power supply and prioritizes more nominal battery energy for a suitable 12V device. Choose ML1202AC 不间断电源 when built-in AC input and two DC connections better suit a low-power broadband installation. In both cases, confirm the continuous load, connectors and required runtime before approving the model.

The right Mini UPS for router and ONT backup depends on the actual devices and their power requirements. For ISPs, FTTH operators and system integrators, the decision includes the power source, connected devices, cables and installation layout. This guide compares the two MYLION models around those buying decisions.

What Is Different Between MU68W and ML1202AC?

Selection factorMYLION MU68WMYLION ML1202AC
Input to the UPS12V DC; requires a compatible external supply100–240V AC, 50/60Hz; built-in AC input
Device output12V 直流12V 直流
Output current rating2.5A continuous / 3A maximum2A maximum; confirm continuous and simultaneous-output limits
Nominal battery energy44.4瓦时25.6 瓦时
电池化学锂离子磷酸铁锂
Connection approachDC output connection; approve the intended cable arrangementTwo DC output connections for compatible devices
Main buying considerationExternal-adapter setup with more nominal stored energyDirect AC-input setup and dual-device cabling

These differences separate three questions: can the UPS power the load, can it connect the required equipment, and can it sustain that equipment for the target outage? Meeting one requirement does not automatically mean the UPS is suitable for the entire setup.

Choose the Input Architecture Before the Battery Size

With MU68W, the typical power path is AC outlet → approved AC/DC adapter → MU68W → 12V device. The external adapter is part of the solution. It must match the UPS input, connector and polarity, while supporting the intended operating and charging requirements.

This arrangement can suit an ISP kit that already specifies an external power supply. Keep the approved adapter and DC cable identified in the equipment list, so installers receive the configuration that was evaluated.

With ML1202AC, the path becomes AC outlet → ML1202AC → compatible 12V devices. Built-in AC input removes the separate external charging adapter from that arrangement. Check the regional plug version, available outlet space and cable routing before selecting it for an installation.

Both models supply DC power to the connected equipment. AC input on ML1202AC describes how the UPS receives power; it does not mean the unit provides an AC socket for a router’s original adapter.

Conceptual diagram comparing MU68W with an external AC/DC adapter and ML1202AC with built-in AC input.
Conceptual power paths. Confirm the supplied version, cable arrangement and total connected load.

Match the Mini UPS to Your Device Setup

For One ONT, ONU or Router

For a compatible 12V access device, MU68W is worth evaluating when the project already uses a separate DC power adapter and its output capability covers the actual load. Its larger nominal energy reserve is relevant when backup duration is a priority.

ML1202AC can also be evaluated for one compatible low-power device when a direct AC-input arrangement is more convenient. A second output connection does not have to be used. Choose according to the installation and runtime requirement, rather than the number of ports alone.

In either case, identify the exact device model and input requirements. A router adapter marked 12V 2A describes the adapter’s output capability; it does not establish that the router continuously consumes 24W.

For an ONT and Router Together

First identify every local device needed for the service. Backing up only the router will not maintain the connection if a separate ONT loses power. Subscriber equipment also depends on the upstream network remaining available.

ML1202AC’s two DC connections make it a candidate for a compatible low-power ONT and router pair. Confirm that both devices require 12V, then check their combined operating load, startup behavior and the approved total output. The two-port layout simplifies the connection arrangement; it does not establish compatibility by itself.

MU68W may be evaluated for a dual-device requirement only with an approved cable arrangement and sufficient output capability. Ask MYLION to review the complete kit rather than assuming an arbitrary splitter is suitable.

When Neither Model Matches the Requirement

A device requiring a different voltage, USB-C PD, PoE or a higher continuous load requires a separate model and interface assessment. Neither more battery energy nor an extra connector changes the output requirements of the equipment.

Use the wider MYLION迷你UPS型号对比 to discuss another direction when the two models do not fit. This is especially relevant when a planned CPE upgrade changes the power interface or load.

Mini UPS selection diagram showing a single router, an ONT plus router, and checks for continuous output, combined load and runtime.
Assess every connected device and the approved combined-output limit before choosing a Mini UPS.

Estimate Runtime at the Same Total Load

Compare battery energy in watt-hours against the same connected load in watts. Comparing one model on an ONT alone and another on an ONT plus router produces an unhelpful buying comparison.

Theoretical Runtime Estimate = nominal battery energy in Wh ÷ constant total device load in W.

For an illustrative calculation, assume an ONT consumes 6W and a router consumes 10W continuously. Their total load is 16W. These are hypothetical device loads, not a MYLION test result or a confirmed compatible equipment pair.

  • MU68W: 44.4Wh ÷ 16W = approximately 2.78 hours before losses.
  • ML1202AC: 25.6Wh ÷ 16W = 1.60 hours before losses.

These are theoretical upper-limit references under the stated constant-load assumption, not measured or guaranteed backup times. Conversion losses, the usable discharge window, internal consumption, temperature and battery condition reduce the available energy. Changing device demand also changes the result.

The calculation explains why battery chemistry and port count should not substitute for runtime evaluation. MU68W has more nominal energy in this comparison; ML1202AC offers a different input and connection arrangement. Request an actual-load result for the proposed version before committing to a backup-time target.

Check These Details Before Ordering

  • Device requirements: record each device’s model, required voltage, operating current and startup behavior. Measure a representative load where practical.
  • Connection fit: verify plug dimensions, polarity and cable rating at every connection. MU68W’s product page identifies DC5521 input and DC5525 output; matching one end does not prove that the other end fits the CPE.
  • Input supply and installation: confirm the approved external adapter for MU68W, or the regional AC plug and outlet arrangement for ML1202AC. Include the actual cables in the sample kit.
  • Output and backup objective: check continuous and combined-output limits, the target outage duration, installation conditions and the available recharge interval.
  • Sample acceptance: test the exact kit through device startup, loss of input power, normal restoration and the required runtime. Record any reboot or manual intervention, then retain that approved configuration for the order.

For a practical validation plan, refer to the Mini UPS field trial checklist. The purpose is to confirm the purchase decision with the equipment your technicians will install.

常见问题解答

Which Mini UPS Is Better for Router and ONT Backup?

MU68W is worth evaluating when an external-adapter layout and more nominal battery energy suit the project. ML1202AC is worth evaluating when built-in AC input and two DC connections suit a compatible low-power setup. The final choice depends on the exact load, installation and runtime requirement.

Can ML1202AC Power a 12V ONT and a 9V Router?

Its listed outputs are 12V DC, so it should not be selected directly for a 9V router. A mixed-voltage installation needs a separately reviewed power solution. Having two ports does not mean each port supplies a different selectable voltage.

Does LiFePO4 Automatically Mean Longer Backup Time?

No. Chemistry alone does not determine runtime. Compare nominal watt-hours, usable energy, conversion losses and the same actual load. For service-life requirements, request evidence for the specific battery configuration and operating conditions.

Can I Reuse My Router Adapter with MU68W?

Only after confirming that it matches the UPS input requirements and supports the complete operating and charging load. Check voltage, polarity, connector and available current. A plug that fits is insufficient evidence that the adapter is suitable.

Does ML1202AC Provide AC Output?

No. ML1202AC receives AC power through its built-in AC input and provides 12V DC output to compatible network devices. It does not provide an AC socket for connecting standard AC-powered equipment.

Get a MYLION Recommendation for Your Equipment

To shortlist MU68W 或者 ML1202AC, send MYLION your ONT and router models, voltage requirements, measured load or adapter labels, connector details, target backup duration, destination country and expected quantity.

MYLION can review model selection, cable and connector options, and sample requirements for the project. Contact MYLION for a Mini UPS recommendation based on the complete equipment kit.

关于迈锂

MYLION 为电信、互联网服务提供商 (ISP)、宽带和网络设备应用提供迷你型 UPS 备用电源解决方案。我们为 B2B 客户提供产品选型、设备匹配、样品验证和项目需求分析等支持,涵盖路由器、光网络终端 (ONT)、光网络单元 (ONU)、客户端设备 (CPE)、网关和其他直流供电设备。

分享:

最近的帖子

迈锂故事

zh_CN简体中文
滚动至顶部

获取报价